Sump Pump Failure Cleanup in Cedar Rapids, Iowa
Short answer
If a sump pump failed and water is rising in your basement, keep out of the water near electrical items and call. We get a certified local crew moving to pump out the water and dry the basement. A plumber replaces the pump.
Water or fire damage right now?
Call any time of day. If you would rather not talk yet, send a few photos and tell us what happened.
Fire, gas smell, or a risk of electric shock: leave the building and call 911 first.
When the pump stops
Cedar Rapids Water & Fire answers the phone when a sump pump fails. A certified technician gives you safety steps, and we get an available, certified local cleanup crew moving. Calling and sending photos cost nothing, and you agree on the work and price with the crew before they start. The crew does not repair or sell sump pumps.
Do this now:
- Stay off the basement floor if water is near outlets, the furnace, the water heater or the panel. If you think power is unsafe, do not go down.
- Do not step into water you cannot see the bottom of.
- If the pump is just unplugged or a breaker tripped, and you can reach the outlet or panel while staying dry, resetting it is reasonable. If it fails again, leave it.
- Photograph the water level against a wall or step, and the pump pit.
- Call, and send pictures through photo help.
Why sump pumps matter so much here
A sump pump sits in a pit in the basement floor and moves groundwater out before it reaches the floor. In a city built along a river, and with creeks running through it, a basement that is dry in August can take on water in a wet spring.
Cedar Rapids has seen how fast water can rise. Indian Creek, which runs through Cedar Rapids, Marion and Hiawatha, flooded on June 4, 2002 after 4.76 inches of rain fell in 24 hours at the Cedar Rapids gauge, and the USGS reported peak flows that were beyond what its analysis called a 500-year flood at some locations on the creek. The Cedar River crested at 31.12 feet in June 2008 and about 22 feet in September 2016. Those were river floods, not sump failures, but they show how high the water table can be near the water.
A pump can quit at the worst time: during a storm, when power often goes out. A pump on household power stops when the lights do. After the August 10, 2020 derecho, the National Weather Service found damage consistent with winds of 130 to 140 mph in the Cedar Rapids area, and the city says the damage reached all 74 square miles of Cedar Rapids. Storms like that, and any local power cut, are exactly when a pump without backup cannot run.
What the cleanup crew does
Water from a sump pit usually comes up from groundwater. It is often dirty, since it carries soil, and it may have mixed with water from floor drains. The crew will treat it based on what they find.
They will:
- assess the water, the electrical hazards and how far it spread,
- pump and extract standing water,
- clean affected hard surfaces, and sort contents,
- set air movers and dehumidifiers, and
- use moisture meters to check floors, walls and framing until they are dry.
If the carpet, pad or lower drywall cannot be saved, the crew will say so. Some materials have to come out to let the wall cavity dry. A repair contractor handles rebuilding. This service is cleanup and drying only.
See flooded basement cleanup for the full basement process, and structural drying.
City rules to know about
Where your pump discharges matters. The City of Cedar Rapids has a pilot study of what it calls inflow and infiltration, extra water getting into the sanitary sewer, and inspectors, with the owner's permission, check basements for sump pumps that are wrongly connected to the sanitary sewer. In 2017 the city began a pilot to disconnect sump pump and gutter cross-connections from the sanitary sewer in about 600 homes in Wellington Heights and Vernon Heights, to ease basement flooding.
If you are not sure where your pump drains, ask a plumber or the city before you replace it.
After the cleanup: prevention
A plumber can look at:
- the pit size and the pump's rating,
- the float switch and check valve,
- where the discharge pipe goes and whether it clogs or freezes in winter,
- a battery backup or water-powered backup, and
- a water alarm that sends an alert.
These are plumber jobs. The cleanup crew handles the water.
Insurance
The Iowa Insurance Division says sump pump failure or overflow is generally not covered under a standard homeowners policy, and that coverage can be added. Find out now whether you have it. See does homeowners insurance cover water damage and filing a water damage claim.
Call any time
Sump pumps fail during storms, which is when crews are busiest. Call anyway, and we will get a crew moving as fast as we can. We do not promise arrival times.
Signs your pump is in trouble
Many pumps give warnings before they fail:
- the pump runs constantly, or cycles on and off every few seconds,
- it is noisy, or it hums without pumping,
- the water level in the pit rises to the rim,
- there is rust, mud or debris in the pit, and
- the pump is more than about ten years old, which is a general rule of thumb rather than a promise.
If you see these signs before a storm, call a plumber. If you are in the middle of the storm and water is coming in, call us.
Safety with power outages
A sump pump needs electricity. If the power is out and water is rising, do not run a generator in the basement or garage. Exhaust from generators is deadly. Put it outdoors, well away from windows and doors. Do not wade into a flooding basement to fix the pump. If you have to move electrical cords, do it only from dry ground.
How it differs from a river flood
A sump pump failure is a groundwater problem. The water in the pit comes from the soil around the house, not from the river or the sewer. That means it is usually cleaner than sewage, though it still carries soil. A river flood is different. If you are not sure which one you have, tell the crew what the weather has been, where the water first appeared and whether floor drains were involved. They can tell from how it behaves.
Tell the crew these things
- when the pump last worked, and what happened,
- whether the power was out,
- where the water first appeared, and
- whether the basement has flooded before.
Crews use this to decide how much equipment to bring and where to look for hidden water.
Questions
Why did my sump pump fail in Cedar Rapids?
Common reasons are a power outage, a stuck float switch, a clogged intake, a worn-out motor, or a pit too small for the water coming in. A plumber can tell you which one.
Can I run the discharge to the sanitary sewer?
The city says it has looked for sump pumps wrongly connected to the sanitary sewer and may ask to inspect. Ask the city or a plumber where your pump is allowed to discharge.
Is sump pump failure covered by homeowners insurance?
The Iowa Insurance Division says sump pump failure or overflow is generally not covered by a standard homeowners policy and can be added as an endorsement. Check your policy.
Should I buy a battery backup?
Many homeowners do, because a pump cannot run without power. A plumber can size one for your pit. The cleanup crew does not sell or install pumps.
Last updated 2026-11-16.